The functional layout of the smart multi-functional pole is actually the layout of the mounted equipment, and the demand for mounted equipment on the one hand comes from the investigation and collection of near and long-term construction needs from the use of demand units, and is connected with the original new construction and renovation plans of various rods; On the other hand, it is necessary to make reasonable prediction and resource reservation for future application needs according to different scenarios, and at the same time, it is necessary to reserve installation space and load for other functional rods such as monitoring rods, communication rods, and traffic rods in accordance with the principle of "can be combined". Common smart multi-function pole device mounting application scenarios and recommended configurations can be referred to the following table:

After analyzing the mounting function requirements of the smart multi-function pole, determine the layout of the smart multi-function pole mounting device based on the coverage objectives, spacing requirements, and site environment factors. Optimize the spatial layout and mounting height Settings of the mounted device while meeting the requirements of the mounted device's functionality, security, and landscape. The space layout of the mounted equipment, the requirements of the mounting height setting and the equipment parameters (volume, weight, power consumption, etc.) directly determine the rod layout (point position, spacing), rod design (structure, height, appearance) and the design of supporting facilities such as pipelines and power supply.

Therefore, the layout design of the smart multi-function pole mounting equipment is a key factor affecting the project cost, and should consider the application scenario, functional requirements, landscape environment, resource reservation and economic rationality and other factors to design, so as to achieve reasonable layout, economic and practical, beautiful and generous, and has good scalability.

The location of other mounting function devices other than lighting, according to the specified requirements and the application requirements of the coverage target range, layout spacing requirements to determine the optional target point. The following table lists the common layout spacing and mounting height requirements for mounted devices:

After the functional setting and optional layout position of the smart multi-function bar are clear, the layered layout design should also be carried out on the mounting space, mounting height, interference between each other and wiring requirements of various mounting devices, and the installation height of each mounted device can be determined.

Smart multi-functional composite pole

The first layer (bottom) : suitable for charging pile, multimedia interaction, one-click help, access door, supporting equipment and other facilities, suitable height of about 2.5mm or less.

The second floor (middle) : suitable for road nameplates, small signs, pedestrian signal lights, cameras, public broadcasting, LED large screen and other facilities, suitable height 2.5m~5.5m.

The third layer (upper) : suitable for vehicle signal lights, traffic video surveillance, traffic signs, lane indication signs, small signs, public WLAN and other facilities, suitable height of 5.5m~8m.

The fourth floor (top) : suitable for meteorological monitoring, environmental monitoring, mobile communication, smart lighting, Internet of Things base stations, road test units and other facilities, the height of more than 8m.

The above is the introduction of the functional layout of the intelligent multi-function rod project construction supporting facilities, more about the intelligent multi-function rod project of various scenarios, system architecture, large drawings, modeling drawings, construction drawings and other CAD drawings and learning materials, you can directly contact the author through the contact information on the right side of the website to obtain information, industry exchanges.